You must already own a BT DieselWorks AutoSync device to use this!!!
This is an AutoSync programming license that will add the ability to:
- Adjust odometer mileage value
- Adjust engine idle hour meter value
- Adjust engine run hour meter value
-
VIN learn/marry any used instrument cluster into your vehicle (ie if you want to swap the 4" color DIC instrument cluster in your 2014-2019 pickup truck to the 8" Denali style)
SUPPORTED VEHICLES
2007-2014 GMT-900 Tahoe/Suburban/Avalanche/Escalade/Yukon
2007.5-2014 GMT-900 Silverado/Sierra 2500/3500
2007.5-2013 GMT-900 Silverado/Sierra 1500
2014-2018 K2xx Silveado/Sierra 1500
2019 K2xx Silverado LD
2015-2019 K2xx Silverado/Sierra 2500/3500
2015-2020 K2xx Tahoe/Suburban/Yukon/Escalade
Once the programming has been purchased, the license should be activated within 24 hours, and you can then run the AutoSync WiFi firmware update to download the license to your device.
GMT-900: Key on/engine off, go into the AutoSync config menu, then scroll to Vehicle Setup, then scroll to "ODO/Hrs Update". If "NOT LICENSED" appears, try the AutoSync firmware download again. Press the cruise control RES+ button to enter the odometer/hours setup menu. To adjust odometer, turn tow/haul mode OFF. To adjust hour meter, turn tow/haul mode ON. Press the cruise control SET- button to adjust the "jump" value (ie how many miles the odometer/hours setting will increase/decrease with each press of the +/- tapshift buttons). Press the cruise control RES+ button to program miles and hours.
K2xx: Key on/engine off, go into the AutoSync menu. Then go to "Module Programming". Go to "Odometer/Hours/VIN update". Follow the on-screen instructions. If the "Odometer/Hours/VIN update" menu item does not appear in the module programming list, try the AutoSync firmware update again.
K2xx instrument cluster swapping notes...you are on your own for sourcing the correct instrument cluster and compatible part numbers (ie if you want to swap your 4" color screen IPC for the 8" color screen IPC). We do not provide any tech support for IPC swaps, we only allow the programming to marry a used IPC to the vehicle.
Without properly marrying a used IPC to your vehicle using our software, the odometer will not work (it will show "------", and it could cause immobilizer/theft deterrent problems.
